機修工的英文自我評價（通用6篇）

機修工的英文自我評價 篇1

In the past year, under the leadership of the help of the leadership, after the workers and colleagues of the common struggle, and through their own positive efforts, as equipment maintenance workers I successfully completed their own work. I do a year on the work of a serious summary. The following is my summary of my work this year:

one. Work attitude, ideological work.

I am keen on my own work, strict self-discipline, abide by the rules and regulations of the factory, strict demands on themselves, straighten the work position, always maintain the "modest, prudent, self-discipline, positive" attitude, leadership guidance and colleagues Help, always diligent study, proactive, and strive to improve themselves, and always work hard, conscientiously complete the task, perform good job duties, and constantly strengthen the study, a solid work of their own technology!

Second, to do their own work

To do a mechanic, to deal with their work to understand a clear, familiar and skilled in their own work. Have all the machines and equipment to understand, but also have the ability to respond to failure, deal with the equipment may occur at any time failure. To meet the needs of the production schedule, our unit of equipment failures are often, my years of experience in the maintenance, those who do not understand, I have to try to study, once understood, it suddenly realized, looks complicated, As long as you understand, it will be simple, I not only bear the equipment maintenance work, but also completed a lot of tooling production, I feel very honored, thank the leadership to me such a platform, also feel their labor results and excitement , But also for the development of our manufacturing pride, but these will make me work harder, modest and prudent to learn from others, as much as possible to improve their ability to work in their own positions to play the greatest role, Faster and more efficient to complete their own work, but also enable us to get the maximum benefit units, so that my work and the harvest workers can achieve a balance, so I am more motivated, more confident work.

And other colleagues of interpersonal relationships is also important, because a person's ability is limited, the success of each thing is by the collective wisdom, and colleagues together is the successful completion of leadership to the work of the premise, which One thing is not just work, usually life is also the case, so the unity of other colleagues is not only a personal thing is a duty to work! At work, mutual cooperation is to improve the efficiency of many of our collective work, mutual cooperation, active, so that the task is completed very quickly, this is the power of unity, to play the power of everyone to make work progress faster. I deeply understand.

3. Review the past, look to the future

For the past gains and losses, I will learn from the favorable factors to strengthen their ability to work, the unfavorable factors in their future work excluded, a year of work for me to continue to make progress on the road to make certain , I believe that through my efforts and colleagues, as well as the leadership of the guidance, I will be a good staff, give full play to my ability, but also to thank the leadership of this a suitable job position, so I can For the community to make their own contribution.

Over the past year, I have done the best, I believe that in the future work for the development of remanufacturing, in order to improve the income of workers, I will continue to continue efforts. Although my work has been unsatisfactory in the past year, I believe that as long as I am in the post one day, I will make my best efforts to use all my energy and ability in my work.He must be able to do it! Protection of the company's normal production and operation.

機修工的英文自我評價 篇2

I am keen on my work, strict self-discipline, abide by the rules and regulations of the factory, strictly to the ball itself, put the work position, and always maintain a "modest, prudent, self-discipline, positive" attitude, leadership guidance and colleagues With the help of always diligent study, proactive, and strive to improve themselves and always work hard, conscientiously complete the task, perform good job duties. Adhere to the ideals of building a good factory, a firm increase in workers' income beliefs.Continue to strengthen learning, a solid work of their own technology!

Second, to do their own work

To do a mechanic, to deal with their work to understand a clear, familiar and skilled in their own work.

Have all the machines and equipment to understand, but also have the ability to respond to failure, deal with the equipment may occur at any time failure. To meet the needs of the production schedule, our unit of equipment, although the new equipment, but also frequent failures, such as machine washing machine, no major problems, minor problems in the maintenance process, and gradually improve the machine cleaning Machine awareness, so that small problems can be dealt with quickly, as well as liquid sandblasting machine, in use, there is always a failure to plug the nozzle, so that can not work, broken through the brain, after operator description

Cause of the failure, my analysis, the glass beads used in diameter than in the past, and the specifications are not uniform, resulting in a blocked nozzle, after a bold improvement, increasing the nozzle aperture, the liquid blasting machine is normal work , The tunnel cleaning machine, always produces the transmission chain does not move, before the adjustment of friction, you can, but once, how to adjust the friction, does not work, after analysis, that the friction coefficient is not enough,

Found, and sure enough inside the oil, after careful cleaning, remove the oil, everything is normal, and so a series of maintenance work, we must understand the principle of equipment in order to good maintenance, which is my years of experience in maintenance , I do not understand, I have to try to study, once understood, they suddenly realized, looks complicated, as long as understand, it will be simple, I not only bear the equipment maintenance work, but also completed a lot of tooling Production, for example, several engine-based experimental bench design, mobile engine racks, and so on dozens of pieces, this year we re-manufacturing engine varieties increased a lot, not before these test benches, the workshop down

The task, we immediately accept, and actively to complete, from conception, to the leadership through the design intent, and then cutting the welding, production, and so on, until the engine is placed, commissioning, delivery, each engine model Of the experiment to go through our first course, like the troops did not move for the first horse, when the civil servants of the various engines in the production of my bench to test, I feel very honored, thank the leadership to me Such a platform, but also feel the work of their labor and excitement, but also for the development of our manufacturing pride, but these will make me work harder, modest and prudent to learn from others, as far as possible to improve their ability to work ,

So that their own positions in the play to the greatest effect, faster and more efficient to complete their own work, but also enable us to get the maximum benefit units, so that my work and the harvest of workers can achieve a balance , So I am more motivated, more confident work.

And other colleagues of interpersonal relationships is also important, because a person's ability is limited, the success of each thing is by the collective wisdom, and colleagues together is the successful completion of leadership to the work of the premise, which It is not just work, but also in daily life. So it is not only personal but also a duty to work together.

I have a good relationship with my colleagues. I often help each other because I only have one mechanic. There is a power maintenance workers, a good relationship, and I work with all my colleagues, I have great respect at work, mutual cooperation, is to improve a lot of efficiency, for example, in the oil depot anti-theft window, the test station Door, in the production of sandblasting between the asbestos roof when the rain, give sandblasting between the welding air pressure pipe, we collectively work together, mutual cooperation, active, so that the task is completed very quickly, and this is the power of unity , To play the power of everyone in order to make work progress faster. I deeply understand.

In the repair of the old and waste conservation, but also everywhere carefully, in the production of rain roof, with the waste angle, in the welding air pressure pipe, the use of the waste plant threading pipe,

3. Review the past, look to the future

For the past gains and losses, I will learn from the favorable factors to strengthen their ability to work, the negative factors in their future work excluded, a year of work for me to continue to make progress on the road to make certain , I believe that through my efforts and colleagues, as well as the leadership of the guidance, I will be a good staff, give full play to my ability, but also to thank the leadership of this a suitable job position, so I can For the community to make their own contribution.

Over the past year, I have done the best, I believe that in the future work for the development of remanufacturing, in order to improve the income of workers, I will continue to continue efforts. Although my work has been unsatisfactory in the past year, I believe that as long as I am in the post one day, I will make my best efforts to use all my energy and ability in my work.He must be able to do it!

機修工的英文自我評價 篇3

In this month's time, I am the vehicle maintenance service station vehicle sales, spare parts supply, after-sales service, maintenance and information feedback have a certain understanding and profound experience. Automobile Sales Service Co., Ltd. is a Toyota sentinel, matching, direct-provided first-class maintenance equipment.

I was in the company first engaged in car paint maintenance work, such as polishing, sealing uranium, coating, etc., the beginning of the use of the polishing machine due to unskilled, work will not deal with a lot of problems, and later with the help of slowly Of the progress of which to understand the use of skills. Work becomes more relaxed. In fact, vehicle maintenance is a relatively simple work, the technical content is not high, the most important word on the "careful." I carried out the following principles of car beauty workers:

1, patient and meticulous: car beauty is fine work, similar to the production of handicrafts, I must have the patience, excellence. Careless, error-prone, a little negligent will leave the edge of the corner of the stain.

2, seeking stability to avoid disaster: paint beauty, once polished or polished, will cause the destruction of the original paint, it is difficult to remedy.Therefore, when the problem occurs, I stop and plan to continue.

3, take light to avoid weight: for cosmetic operations, should be based on site and material selection of products, and make tests, trial work. Preferred type of soft, diluted or micro-cut type of product. As far as possible by the low-speed stalls, small power began to test operation, until the speed, force size to meet the requirements date.

4, try to use: In order to ensure operational requirements, I work before, in a small area within the hidden test, in order to grasp the correct use of the product and optimize the method of operation.

Through on-site maintenance practice and the exchange and guidance of employees, the theory and practice, I have learned the theoretical knowledge to consolidate and enrich, develop analysis, the ability to solve practical problems for graduate design and lay a solid foundation.

機修工的英文自我評價 篇4

I entered the company in the company's work, a company's pilot employees, as the company manager of the post, the main responsibility is to assist the company to deal with the affairs of the jurisdiction, involving the company's human resources, administration, production and other matters . First of all thank the general manager and the company all my colleagues in the work of their strong support and help, but also for the company to provide me with a stage to display their talents. At the same time, through their own efforts, making the company's production, administration and other aspects of the system has been further improved.

As a manager of a department, I know my job is to assist the general manager of the work, coordination between the various departments work, improve the company system and promote the production of a virtuous circle, so communication coordination, development of systems, tracking production My three major work content. Communication and coordination is an essential factor for the survival and healthy development of the organization. Only by coordinating the work among the various departments can the functions of the various departments be brought into full play and the smooth production of the enterprise can be guaranteed. System is to better maintain business order, to ensure the smooth operation of all aspects of business. The production is the fundamental business, to ensure the smooth progress of production to ensure that the company is the largest corporate profit target

First came to the company, the face of the company's many problems, as assistant general manager of the task I feel heavy, heavy responsibility, greater pressure, and sometimes even fear that they can not complete the task given by the company, can not achieve general manager Expectations for me. However, there is pressure to power. It is also based on this pressure, only gave me the power to work hard, so I always want to do their work to the most perfect level, and slowly find the work of self-confidence. In the process of work, the company colleagues gave me a great help, so I am in a very short period of time to be able to understand the company, familiar with the company environment, so I can smoothly carry out the work of the company's system Is also an orderly way to embark on a standardized road.

During this period of time, I have fulfilled my duties with due diligence. I believe that everything I have done and my abilities have been felt by the general manager and all my colleagues in the company. In this general manager to submit a positive application, I urge the general manager of careful consideration. If positive, I will continue to use modest attitude and full of enthusiasm to do my job, create value for the company, with the company to look forward to a better future!

機修工的英文自我評價 篇5

I am engaged in maintenance for three years, proficient in soldering iron technology, hot air gun technology, skilled analysis of electronic circuits to explain, familiar with the introduction of new products into the maintenance work flow and maintenance of all types of electronic products and abnormal analysis work, Abnormal and able to analyze and complete the maintenance report.

Work hard, practical, meticulous and patient, self-motivated, hands-on ability, diligent thinking and summary, full of creativity; can endure hardship, have strong organizational skills and team spirit; cheerful, warm, Adapt to the environment and strong, easy to interact with people.

I am warm and open-minded, can quickly adapt to the new environment, learning new knowledge, grasp the new skills.

Give me a chance, I will use my practical actions to confirm your choice, I believe your trust and my strength can bring us a common success!

機修工的英文自我評價 篇6

First, work attitude, ideological work.

I am keen on my work, strict self-discipline, abide by the rules and regulations of the factory, strictly to the ball itself, put the work position, and always maintain a "modest, prudent, self-discipline, positive" attitude, leadership guidance and colleagues With the help of always diligent study, proactive, and strive to improve themselves and always work hard, conscientiously complete the task, perform good job duties. Adhere to the ideals of building a good factory, a firm increase in workers' income beliefs.Continue to strengthen learning, a solid work of their own technology!

Second, to do their own work

To do a mechanic, to deal with their work to understand a clear, familiar and skilled in their own work. Have all the machines and equipment to understand, but also have the ability to respond to failure, deal with the equipment may occur at any time failure. To meet the needs of the production schedule, our unit of equipment, although the new equipment, but also frequent failures, such as machine washing machine, no major problems, minor problems in the maintenance process, and gradually improve the machine cleaning Machine awareness, so that small problems can be dealt with quickly, as well as liquid sandblasting machine, in use, there is always a failure to plug the nozzle, so that can not work, broken through the brain, after operator description Cause of the failure, my analysis, the glass beads used in diameter than in the past, and the specifications are not uniform, resulting in a blocked nozzle, after a bold improvement, increasing the nozzle aperture, the liquid blasting machine is normal work , The tunnel cleaning machine, always produces the transmission chain does not move, before the adjustment of friction, you can, but once, how to adjust the friction, does not work, after analysis, that the friction coefficient is not enough, Found, and sure enough inside the oil, after careful cleaning, remove the oil, everything is normal, and so a series of maintenance work, we must understand the principle of equipment in order to good maintenance, which is my years of experience in maintenance , I do not understand, I have to try to study, once understood, they suddenly realized, looks complicated, as long as understand, it will be simple, I not only bear the equipment maintenance work, but also completed a lot of tooling Production, for example, several engine-based experimental bench design, mobile engine racks, and so on dozens of pieces, this year we re-manufacturing engine varieties increased a lot, not before these test benches, the workshop down 

And other colleagues of interpersonal relationships is also important, because a person's ability is limited, the success of each thing is by the collective wisdom, and colleagues together is the successful completion of leadership to the work of the premise, which It is not just work, but also in daily life. So it is not only personal but also a duty to work together. I have a good relationship with my colleagues. I often help each other because I only have one mechanic. There is a power maintenance workers, a good relationship, and I work with all my colleagues, I have great respect at work, mutual cooperation, is to improve a lot of efficiency, for example, in the oil depot anti-theft window, the test station Door, in the production of sandblasting between the asbestos roof when the rain, give sandblasting between the welding air pressure pipe, we collectively work together, mutual cooperation, active, so that the task is completed very quickly, and this is the power of unity , To play the power of everyone in order to make work progress faster. I deeply understand.

In the repair of the old and waste conservation, but also everywhere carefully, in the production of rain roof, with the waste angle, in the welding air pressure pipe, the use of the waste plant threading pipe,

3. Review the past, look to the future

For the past gains and losses, I will learn from the favorable factors to strengthen their ability to work, the negative factors in their future work excluded, a year of work for me to continue to make progress on the road to make certain , I believe that through my efforts and colleagues, as well as the leadership of the guidance, I will be a good staff, give full play to my ability, but also to thank the leadership of this a suitable job position, so I can For the community to make their own contribution.

Over the past year, I have done the best, I believe that in the future work for the development of remanufacturing, in order to improve the income of workers, I will continue to continue efforts. Although my work has been unsatisfactory in the past year, I believe that as long as I am in the post one day, I will make my best efforts to use all my energy and ability in my work.He must be able to do it!